Solar Casas
2500Wh Power Station
- Pure sine wave 110V/220V AC output*2
- 648Wh capacity and 650W max ouput peak power
- Li-ion BAK battery brand 3000mAh*60PCS 6S10P, 3000+ life cycles
- 3*USB-A ports, 2*USB-C ports, 2*AC outlets, 1*car charger, 1*LED light
- Four ways(Solar panel, Wall socket, Vehicle's 12V output and Generator) to recharge
Overview
Huayu Portable Power Station is an ideal multifunctional backup power device for home owners and outdoor life players.
Different from noise diesel generator and other complicated power supply devices(systems), Huayu Portable Power Station is a smart, quiet and eco-friendly “All-in-One” backup power supply device which is designed for easy moving and can fulfil all your basic power needs during power outage and outdoor life for power-hungry appliances and devices.
Smart
Fits all basic power-hungry appliances and devices for residential use and personal use through multiple DC/AC ports, easy to charge from solar panels, from wall-mounted sockets or from our cars.
Quiet
No noise pollution such as diesel generators when it generates, stores energy and when we use energy, integrated deep-cycle LFP batteries ensure safe & quiet power supply all the time.
Convenient
The portable power station is designed with light weight and easy to carry or move, which makes charging supper easy in different places as you wish.
All-in-One
Easy to move as a complete unit, the portable power station is an independent power supply system integrated with LFP batteries, solar inverter/controller and multiple DC ports and AC ports, no other extra components are needed.
Eco-Friendly
It can be charged by solar panels in most cases and converted DC power to AC power through pure sine wave solar inverter, the whole process of power generation, battery charging and power supply is clean and quiet.
Interface
Application
Packing List
Q: If the inverter can work in pure off grid application?
A: Yes, this inverter support pure off grid running for islands.
Q: If the inverter can work in three phase system or three phase mete?
A: Yes, the inverter can work with three phase meter and will get power for the other two phases and give compensate to the other two phases. For example: Phase A Load: 500W, Phase B Load: 600W, Phase C Load: 700W, then inverter will output 500+600+700=1800W in phase A. In some countries, the export power of phase A will compensate the cost of phase B and phase C, so please contact the power company before install a three phase meter.
Q: How can I keep battery capacity when there is grid in case of load shedding?
A: You can enable charge priority in the monitoring system and then the solar will used to charge battery first, the battery will not discharge until load shedding, this function is usable for the area where always has load shedding.
Q: Can I control the generator by the inverter？
A: Yes, a external control box (please check with your installer or distributor if you need it) is needed, and your generator should support external control function. The generator will be automatically started when battery voltage is lower than the cut-off value or there is charge request or stop charge flag is set.
Q: Why can’t I monitor the each units although I set the right password and add all data loggers in the monitoring system?
A: Please check
(1) CAN cable connection is connected to the right COM port,
(2) If you have make the parallel communication cable yourself, please make sure you have make the right cable, otherwise, it will interrupt the Wi-Fi communication.
Q: How can I monitor and configure the inverter when the network is not available at site ?
A: You can monitor and configure the inverter by local connection that is available in the Huayu Portal APP.